Kurzweil PC3LE8 Specifications download pdf (Page 332)

14-30

Tutorials: Setup Mode

Switch Between Zones Based On Played Keyboard Velocity

4. On the KEYVEL page, use the Chan/Zone buttons to the left of the display to select Zone 2 (see

below.) You can view the number of the selected Zone in the top right corner of screen.

5. On the KEYVEL page for Zone 2, use the cursor buttons to select the LoVel field. Then press 80 on

the alphanumeric pad and press the Enter button to enter 80 for the LoVel field (see below.) This

means that 80 is the lowest keyboard velocity that Zone 2 will respond to, anything lower will not

cause Zone 2 to be heard. Any velocity of 80 or more will cause Zone 2 to be heard because Zone

2’s HiVel field is set to 127, which is the maximum MIDI velocity.

6. Next, lets set the same velocity range for Zone 3. Use the Chan/Zone buttons to the left of the

display to select Zone 3 (see below.) You can view the number of the selected Zone in the top right

corner of screen.

7. On the KEYVEL page for Zone 3, the LoVel field will still be selected if you haven’t moved the

cursor. If the LoVel field is not selected, use the cursor buttons to select the LoVel field. Then press

80 and press the Enter button on the alphanumeric pad to enter 80 for the LoVel field (see above.)

NowbothZones2and3willonlyrespondtovelocitiesof80ormore.Tryplayingsomesoft

quietnotes,youshouldhearonlypiano.Next,playsomehardloudnotes,and

youshouldhear

thepianoandpads(ifnot,reviewtheprevioussteps.)Dependingonyourplayingstyle,you

maywishtosettheLoVelvalueforZones2and3lowerorhighersothatZones2and3canbe

triggeredbylowervelocitiesoronlyveryhighvelocities.

Step 7

Step 6

1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 378 379

No comments

Kurzweil PC3LE8 Specifications Page 332