Kurzweil SPS4-8 Datasheet download pdf (Page 78)

Edit Setup Mode

The Zone-specic Parameters

8-12

Controller

Number

Destination

Name

Description

135 KeyVel Key Velocity

136 ProgInc Program Increment—increments current program number.

137 ProgDec Program Decrement—decrements current program number.

138 ProgGoto Go to Program—selects program.

139 SetupInc Setup Increment—increments current setup number.

140 SetupDec Setup Decrement—increments current setup number.

141 SetpGoto Go to Setup—selects setup.

142–144 MIDI 142–144 MIDI Controllers 142–144

145 TransUp Transpose Up (ST)

146 TransDown Transpose Down (ST)

147–148 MIDI 147–148 MIDI Controllers 147–148

149 MuteZn Mute Zone – values above 64 will mute the zone, values

below or equal to 64 will unmute the zone.

150–160 MIDI 150–160 MIDI Controllers 150–160

161 Panic Panic

162 SoloZn Solo Zone

163–178 MIDI 163–178 MIDI Controllers 163–178

Entry Value

The Entry Value parameter determines the value of the continuous controller that is sent

as a MIDI message when the current Setup is loaded. You can set this parameter to any

number between 0 and 127, or to None. Pressing both Value buttons simultaneously will set

this parameter to None.

If Entry Value is set to None, then when you load the current Setup, the controller will be

at whatever value corresponds to its current position. If you specify an Entry Value, then a

MIDI controller message with this value will be sent when you load the current Setup.

Exit Value

The Exit Value parameter determines the value of the continuous controller that is sent as a

MIDI message when the current Setup is exited. You can set this parameter to any number

between 0 and 127, or to None. Pressing both Value buttons simultaneously will set this

parameter to None.

If Exit Value is set to None, then when you leave the current Setup, the controller will be

at whatever value corresponds to its current position. If you specify an Exit Value, then a

MIDI controller message with this value will be sent when you close the current Setup.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 119 120

No comments

Kurzweil SPS4-8 Datasheet Page 78